How to use your Swing
10
1
2
5
3
4
Note: If the pump has been running for 30 minutes without any manipulations,
the Swing will automatically switch off.
Centre breastshield over
your nipple.
Once your milk starts to flow, press 4 to switch to
the Expression Phase.
After two minutes the pump will automatically switch
from the Stimulation to the Expression Phase.
1 On/Off button
2 Vacuum decrease button (-)
3 Vacuum increase button (+)
4 Let-down button
5 LED
lights up On
does not light up Off
regular flashing Stimulation Phase
light constantly on Expression Phase
rapid flashing Min./Max.
Switch on the breastpump
by pressing 1.
Now the Stimulation
Phase starts.
Adjust the vacuum strength by
pressing 2/3.