Reinigung Und Wartung; Technical Data; General Description - MSW Motor Technics MSW-DP500 Manuel D'utilisation

Schmieren Sie bewegliche Teile des Geräts mit Öl,
»
das für die Wartung von Maschinen bestimmt ist.

4.5 Reinigung und Wartung

• Bevor Sie anfangen zu reinigen, trennen Sie das
Gerät von der Stromversorgung.
• Verwenden Sie zum Reinigen der Oberfläche
ausschließlich Mittel ohne ätzende Inhaltsstoffe.
• Die Belüftungsöffnungen sind mit Pinsel und
Druckluft zu reinigen.
• Bewahren Sie das Gerät an einem trockenen, kühlen,
vor Feuchtigkeit und direkter Sonneneinstrahlung
geschütztem Ort auf.
8
U S E R M A N U A L

TECHNICAL DATA

Parameter description
Product name
Model
Voltage [V~]/
frequency [Hz]
Rated power [W]
Working mode [min]
Chuck size
Working tip speed [rpm]
Motor rotation speed
(without load) [rpm]
Maximum drilling depth
[mm]
Worktop size [mm]
Worktop Tilt adjustment
range
Column diameter [mm]
Spindle distance from the
column [mm]
Maximum spindle distance
from worktop [mm]
Spindle distance from the
base [mm]
Sound power level L
Sound pressure level L
Base dimensions [mm]
Dimensions [mm]
Weight [kg]

1. GENERAL DESCRIPTION

The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines,
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD
To increase the product life of the device and to ensure
a trouble-free operation, use it in accordance with this user
manual and regularly perform the maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
Rev. 07.08.2018 Rev. 07.08.2018
changes associated with quality improvement. Taking
into account technological progress and noise reduction
Parameter value
opportunities, the device was designed to reduce noise
emission risks to the minimum.
Drill press
Legend
MSW-DP500
230/50
500
S2 30
B16/3-16 mm
9-stage adjustment
(280/450/540/620/
720/1000/1550/
1800/2350)
1450
50
167x167
0÷45
The original operation manual is in German. Other
language versions are translations from German.
Φ46
2.Usage safety
115
Electrical equipment:
270
330
Whenever "device" or "product" are used in the
warnings and instructions, it shall mean <drill press>.
Do not use in very humid environments or in the direct
87dB(A)
vicinity of water tanks. Prevent the device from getting wet.
WA
Uncertainty K=3dB
Risk of electric shock! Do not cover any air inlets / outlets.
74dB(A)
3.1 Electrical safety
pA
Uncertainty K=3dB
a)
320x200
440x200x610 b)
14
c)
using state-of-the-art technologies and
d)
THIS USER MANUAL.
3.2 Safety at the workplace
a)
The product satisfies the relevant safety
standards.
Read the instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation.
(general warning sign)
Use ear protection. Exposure to loud noise may
result in hearing loss.
Wear protective goggles.
Wear a dust mask (respiratory tract protection).
Electric shock warning.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
The plug must fit the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
Avoid touching earthed elements such as pipes,
heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to
rain, in direct contact with a wet surface or operating
in a humid environment. Water ingression into the
device increases the risk of damage to the device
and of electric shock.
Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
Make sure the workplace is orderly and well
lit. A messy or poorly lit workplace may lead to
accidents.
9