Table des Matières
Publicité
The microphones can be used with elastic suspensions.
The EA 19/25 elastic suspension suppresses footfall
sound effectively.
Using the special EA 86 elastic suspension with a flash
holder, the MCE 72 can be mounted onto the "hot shoe"
of a camcorder directly but remains isolated from noise
caused by the video head and the drive.
Setting up
Set up the microphone so that the
description points to the top. "L"
points to the left and "R" to the
right side.
The angle of the principal axis of the
two microphone capsules is 120°. This results in a pickup
angle of 140°, i.e. ±70° to the microphone axis.
Depending on their position sound sources within this
pickup angle are recorded from the very left to the very
right. The width of the stereo base can be adjusted via
the recording distance i.e. a small distance results in a
broad field and vice versa.
Maintenance
Use a soft, damp cloth for cleaning the microphone. If
necessary, you can use a gentle cleansing agent (such as
washing-up liquid). Make sure not to allow any water to
enter the transducer element and never use any solvent
cleansers.
Service
Servicing must be carried out by qualified service personnel
only. Dismantling the microphone yourself may invalidate
the guarantee.
Versions
Model
Description . . . . . . . . . . . . . . Order #
MCE 72 PV CAM
Stereo condenser microphone,
cardioid, phantom powered,
with EA 86 elastic suspension
for mounting onto a "hot shoe",
WS 72 wind shield and
MVK 82-N(CM) cable,
0.5 m . . . . . . . . . . . . . . . . . . . 492.612
12
Model
MCE 72 CAM Stereo condenser microphone,
MCE 72
L
R
Optional Accessories
120∞
MVK 72-K3 Connecting cable with
MVK 82-K3 Connecting cable with
MVK 82-N(CM)
MVK 82-N(CM)
EA 19/25
EA 86
MAV 800
MKV 8
WS 72
WS 101
WJ 930
Description . . . . . . . . . . . . . . Order #
cardioid, with EA 86 elastic
suspension for mounting onto a
"hot shoe", WS 72 wind shield
and MVK 72-K3 cable. . . . . . . 470.635
same as above,
but with MKV 108
microphone clamp
and MVK 82-K3 cable. . . . . . . 465.461
5-pin XLR socket and
3.5 mm stereo jack plug,
0.35 m long . . . . . . . . . . . . . . 470.643
5-pin XLR socket and
3.5 mm stereo jack plug,
2.5 m long . . . . . . . . . . . . . . . 450.949
Connecting cable with
5-pin XLR socket and
2 x 3-pin XLR plugs,
2.5 m long . . . . . . . . . . . . . . . 448.966
same as above,
but 0.5 m long . . . . . . . . . . . . 481.777
Elastic suspension, with
MKV 11 mic clamp . . . . . . . . . 407.194
Elastic suspension with
BS 86 set for flash holder . . . . 407.186
Clip 3/8" for hanging
installations of microphones
(from the ceiling) . . . . . . . . . . 448.133
Microphone clamp with
3/8" internal thread,
for shaft diameters
of 22 - 32 mm . . . . . . . . . . . . 407.216
Wind shield, charcoal-grey . . . 565.016
Wind shield, charcoal-grey . . . 111.244
Windjammer (additional
wind shield for MCE 72),
hair length 40 mm . . . . . . . . . 490.903
13
Publicité
Table des Matières
