Daily Use; Helpful Hints And Tips - Zanussi ZEV6340FBA Notice D'utilisation

Residual heat indicator
Warning! The risk of burns from
residual heat!

Daily use

Warning! Refer to the Safety chapters.
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
• You do not set the heat setting after you acti-
vate the appliance.
• You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). An acoustic signal sound
some time and the appliance deactivates. Re-
move the object or clean the control panel.
• You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates. See
below.
• The relation between heat setting and times
of the Automatic Switch Off function:
•
, - — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The heat setting
Touch to increase the heat setting. Touch
to decrease the heat setting. The display shows

Helpful hints and tips

Cookware
Information about the cookware
• The bottom of the cookware must be as thick
and flat as possible.
www.zanussi.com
the heat setting. Touch
time to deactivate the cooking zone.
The Child Safety Device
This function prevents an accidental operation
of the appliance.
To activate The Child Safety Device
• Activate the appliance with
the heat settings.
).
• Touch
4 seconds. The symbol
• Deactivate the appliance with
To deactivate The Child Safety Device
• Activate the appliance with
the heat settings. Touch
cooking zones for 4 seconds. The symbol
comes on.
• Deactivate the appliance with
To override The Child Safety Device for
only one cooking time
• Activate the appliance with
comes on.
• Touch
4 seconds. Set the heat setting in 10 sec-
onds. You can operate the appliance.
• When you deactivate the appliance with
The Child Safety Device operates again.
• Cookware made of enamelled steel and with
aluminium or copper bottoms can cause the
colour change on the glass-ceramic surface.
Energy saving
How to save energy
and
. Do not set
of the two front cooking zones for
comes on.
. Do not set
of the two front
. The symbol
of the two front cooking zones for
at the same
.
.
,
17