Before First Use - SilverCrest DB 1400 B2 Mode D'emploi

CAUTION – PROPERTY DAMAGE!
Use only the ironing temperatures stated in the care instruc-
►
tions as suitable for the material. Otherwise, you could dam-
age the textiles. If you do not know the correct care instruc-
tions, start with the lowest temperature setting.
If the clothing care instructions forbid ironing, (
►
the clothing item may not be ironed. Ignoring this warning
could lead to permanent damage to the clothing item.
The water tank should be filled only with tap water or distilled
►
water. Otherwise you will damage the steam iron.
Do not clean the steam iron with solvents, alcohol or abrasive
►
cleaning agents. These could damage it.
Before first use
1) Remove the steam iron from the packaging.
2) Remove all stickers and protective films from the steam iron and from the sole
of the iron
►
3) Fill the water tank with water (See the chapter "Filling the water tank").
4) Insert the plug into a mains power socket supplying an electrical current as
detailed on the rating plate.
5) Move the temperature control
6) Heat the steam iron up for several minutes at the highest setting.
7) Activate the steam blast button
out of the sole of the iron
8) Then iron over a piece of scrap fabric to remove any production residues that
may remain on the sole of the iron
DB 1400 B2
.
WARNING – RISK OF SUFFOCATION!
Plastic bags can be dangerous. To avoid the risks of asphyxiation, keep
plastic bags out of the reach of babies and toddlers.
to the "MAX" position.
a couple of times so that steam comes
.
.
symbol),
GB │ IE │ 7 ■