Remote Control Pairing - TEMPUR-PEDIC ERGO Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

remote control pairing

Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps below.
STEP 1
Locate the battery backup box and
press the button TWICE. A light
on the battery back up box will
illuminate.
STEP 2
Remove the back cover of the
remote, press and hold down the
PAIR button. The PAIR button will
illuminate blue and start flashing.
When the PAIR button stops
flashing, the illuminated light on
the battery backup box will go
out. Release the PAIR button.
The remote is now paired to the
adjustable base.
STEP 3
Test all remote functions. If the remote buttons do
not impact the adjustable base movements, please
repeat the process again or call Tempur-Pedic customer
service: U.S. 1-844-309-3597 | Canada : 1-800-887-4321
México: 01-722-273-1810
12
Battery
backup box
button
PAIR
Button
*ALTERNATE REMOTE PAIRING PROCESS
Locate the control box (see parts list on page 6) and
press the button twice. A green LED light will illuminate
on the control box. On the back of the remote, press and
hold the PAIR button. The PAIR button will illuminate
blue and start flashing. When the PAIR button stops
flashing, the green LED light on the control box will go
out. Release the PAIR button. The remote is now paired
to the adjustable base.
Child Lock Feature
Activate Child Lock
Press and hold HEAD UP and HEAD DOWN
buttons together for approximately six (6) seconds.
The remote backlight will flash twice. When the
backlight light goes away, the remote is now in
Child Lock. Pressing any buttons while in Child
Lock will yield no movement to your adjustable
base.
Deactivate Child Lock
Press and hold FOOT UP and FOOT DOWN buttons
together for approximately six (6) seconds. The
remote backlight will flash twice. When the
backlight light goes away, the remote is no longer
in Child Lock. The remote and adjustable base will
work normally.

Publicité

Table des Matières
loading

Table des Matières