Editing Of Each Pattern - Singer 8060 Notice D'utilisation

F. EDITING OF EACH PATTERN
You can change the stitch width, length, mirror/
reverse stitch and elongation of each pattern.
You can also change the thread tension of selected
all patterns
1. Press the EDIT button.
LCD will change to the editing mode.
2. As you shift the cursor, the setting of each
pattern will be indicated.
3. By pressing each Function button, you can
change setting as below a-d.
4. After you have completed the editing, press the
return button (F1) or EDIT button.
Machine will return to selecting mode.
NOTE:
Letter stitches cannot change settings. (except for
thread tension)
a. Mirror / Reverse stitch
Press the Function button (F2) directly under
mirror/reverse icon, stitch will change alternately
or in rotation.
The descriptions of the mirror/reverse icons are
below.
a1. Regular stitch (normal stitch)
a2. Mirror stitch (fl ips from left to right)
a3. Reverse stitch (reverse front and back)
a4. Mirror and Reverse stitch, pattern will fl ip
from left to right and from front to back.
If symbol is not indicated, its pattern cannot
change (mirror/reverse stitch).
b. Elongation
By pressing the Function button (F3) directly
under the elongation mark, stitch will elongate
fi ve different sizes. (b1-b5)
If symbol is not indicated, its pattern cannot
elongate.
92