Table des Matières
Publicité
F. EDITING OF EACH PATTERN
You can change the settings and stitch width/
length of stitch patterns.
You can also change the thread tension of selected
patterns.
1. Press the Edit button.
LCD will change to the editing mode.
2. As you shift the cursor, the setting of each
pattern will be indicated.
3. By pressing each function button, you can edit
as below a-d.
4. After you have completed the editing, press the
return button (F1) or Edit button.
Machine will return to selecting mode.
Note:
Letter stitches cannot change stitch width/length
and settings (Mirror/reverse and elongation).
a. Deleting (See previous page.)
b. Setting
1. You can make change settings by pressing the
function button (F3) directly under setting icon.
2. LCD will change to show setting mode.
i. Mirror/reverse
iii. Twin needle
i Mirror / Reverse stitch
Press the function button (F4) directly under
mirror/reverse icon, and the stitch will change
alternately or in rotation.
The descriptions of the mirror/reverse icons are
below.
i-1. Regular stitch (normal stitch)
i-2. Mirror stitch (flips from left to right)
i-3. Reverse stitch (reverse front and back)
i-4. Mirror and Reverse stitch, pattern will flip
from left to right and from front to back.
If symbol is not indicated, its pattern cannot
change (mirror/reverse stitch).
ii. Elongation
By pressing the function button (F5) directly
under the elongation mark, stitch will elongate
five different sizes. (ii.1-ii.5)
If symbol is not indicated, its pattern cannot
elongate.
iii Twin Needle
Press this button (F2) when you sew with twin
needle. Twin needle mark will be highlighted. (See
page 84)
3. By pressing the return button (F1), machine will
return to editing mode.
By pressing EDIT button, machine will return to
selecting mode.
90
ii. Elongation
F3
b-i
F4
b-ii
F5
b-iii
F2
F1
iii
ii
i
i-1
i-2
i-3
i-4
ii
1
ii
2
ii
3
ii
4
ii
5
Publicité
Table des Matières
