Messages On Lcd - Singer 8060 Notice D'utilisation

MESSAGES ON LCD

1. Winding the bobbin.
2. Lower the buttonhole lever.
3. After sewing buttonhole, raise the presser foot
lifter and set the frame of Buttonhole Foot to
starting position.
4. Release the foot controller pedal.
5. Lower the presser foot.
6. Machine cannot memorize any more.
7. Select a pattern.
8. Release the Reverse button.
9. Release the Start/Stop button.
10.Rethread the upper thread.
11.Foot controller is connected.
12.Release the Needle Up/Down - Slow button.
13.Release the Thread Cutter button.
14.Turn off the power switch.
102
1
2
3
4
5
6
7
8
9
10
11
12
13
14