Table des Matières

Publicité

THREAD TENSION

This machine adjusts the thread tension
automatically when pattern is selected.
However you can change the thread tension as
follows.
1. Press the function F5 button directly under the
tension mark.
LCD changes to the thread tension mode.
2. To increase the upper thread tension, press the
function F5 (+) button.
To decrease the upper thread tension, press the
function F4 (–) button.
Pre-set tension number is highlighted.
The mark "
" is indicating the absolute thread
tension.
By pressing the function F3 (AUTO) or clear "C"
button, thread tension will return to pre-set.
By pressing the function F1 button, LCD return to
the previous mode (Stitch information mode).
When another stitch pattern is selected, thread
tension will return to pre-set.
You can start sewing at this mode and change
tension while sewing.
A. Preset thread tension
Upper and bobbin thread will lock
appromaximately in the middle of fabric.
B. When thread tension is increased.
Bobbin thread will appear on the top side of
fabric.
C. When thread tension is decreased.
Upper thread will appear on the bottom side of
fabric.
D. Thread tension except for straight stitch
Thread tension except for straight stitch is set
to a slightly looser tension than when sewing
straight stitch.
You will obtain a nicer stitch when upper thread
appears on bottom side of fabric.
E. Helpful Hints
1. If your sewing appears as shown in the
illlustration, stitches on top side of fabric are
good but bottom side has loose thread loops, it
could be that the upper thread is not threaded
correctly. Refer to page 32 for correct threading.
2. If after checking the top thread and the bobbin
thread is still showing on the top side, check the
bobbin to see if it is set correctly. Refer to page
30 for correct bobbin setting.
42
F5
F1
F3
F4
F5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Quantum stylist 9960

Table des Matières