Stroller Wheels - BOB BLAZE Guide De L'utilisateur

BOB Gear

Stroller Wheels

Rear Wheel Installation
1� Unlock Parking Brake
Prior to installing the rear wheels,
position the parking brake in the
unlocked position.
2� Insert Rear Wheel Stub Axle
Insert the rear wheel's stub axle
into the hole in the rear dropout
until a "click" is heard.
IMPORTANT:
the wheel may not be secure in
the attachment bracket and may
detach during operation. Pull on
wheel to ensure proper installation�
Rear Wheel Removal
1� Unlock Parking Brake
Prior to removing the rear wheels,
position the parking brake in the
unlocked position.
2� Remove Wheel
Raise the wheel a few inches off
the ground and pull the wheel out
of the dropout.
6
If no click is heard,
Front Wheel Installation
1� Remove Through Axle From
Front Wheel
Unscrew the nut from the through
axle and remove the axle from the
front wheel.
NOTE: Prior to installing the front
wheel, it is necessary to open the
brake release to provide clearance
for the wheel/tire to pass the
brake pads.
2� Open Brake Quick Release
Open the brake release by
rotating the brake release lever in
the clockwise direction.
Brake Quick
Release
3� Insert Front Wheel
When facing the front of the
stroller, insert the wheel between
the fork and align the wheel hub
with the holes in the fork blades.
OPEN