Assembly; Unfolding; Front Wheels; Rear Wheels - BOB MOTION Guide De L'utilisateur

Assembly

Unfolding

• Push the frame release lever
on the chassis lock and open
the frame .
• Lift handle until frame locks
into upright position .

Front Wheels

• Slide each front wheel
mounting pin into front
stroller housing . Listen for an
audible click .
• Pull wheel to ensure that it is
secure in housing .

Rear Wheels

• Slide the rear wheel pin
into the rear axle mounting
bracket until it locks into
place . The wheels are
labeled left and right (child's
left or right from the seated
position) .
• Pull wheel to ensure that it is
secure .
6
R or L