Tips On Saving Energy; Service Programme - Siemens TE501 Série Mode D'emploi

Masquer les pouces Voir aussi pour TE501 Série:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Note: After cleaning thoroughly, the seals
on the brewing unit should be greased
regularly to keep them in ideal condition.
Apply a thin layer of the special grease
intended for this purpose (order no. 311368)
all around the seals.

Tips on saving energy

● The fully automatic espresso machine
switches off automatically after one hour
(default setting). The default time of one
hour can be shortened (see "Settings",
"Automatic switch-off" on page 11).
● Switch off the fully automatic espresso
machine when not in use. To do this,
press the service button (12). The appli-
ance rinses and switches off.
● If possible, do not interrupt coffee or milk
froth dispensing. Stopping a process
prematurely results in higher energy con-
sumption and the drip tray fills up more
quickly.
● Descale the appliance regularly to avoid
a build-up of limescale. Limescale residue
results in higher energy consumption.

Service programme

Duration: approx. 35 minutes
Depending on use, the service button (12)
flashes at certain intervals.
The appliance should be cleaned and
descaled immediately using the service
programme. If the service programme is
not run as instructed, the appliance may be
damaged.
¡
¡
Caution!
Follow the instructions for using the descal-
ing and cleaning agents for each service
programme. Please observe the safety
instructions on the packaging of the cleaning
agent.
Never interrupt the service programme.
Do not drink the liquids.
Never use vinegar, vinegar-based products,
citric acid or citric acid-based products.
Never put descaling tablets or other descal-
ing agents in the drawer (4).
Specially developed and suitable descal-
ing and cleaning tablets are available
from retailers or customer service.
Order number
Cleaning
tablets
Descaling
tablets
Important: If there is a water filter in the
water tank (16), it must be removed before
starting the service programme.
To start the service programme, press and
hold the service button (12) for at least
5 seconds.
Information: The service button (12)
flashes while the programme is running.
Retailer
Customer
service
TZ60001
310575
TZ60002
310967
en
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Te501203rwTe501505Te501209rw

Table des Matières