Safety Instructions - Festool HK 85 EB Notice D'utilisation D'origine

Original operating manual
1 Symbols................................................ 17
2

Safety instructions ............................... 17

3 Intended use......................................... 20
4 Technical data ...................................... 20
5 Machine features ................................. 20
6 Operation.............................................. 20
7 Settings ................................................ 21
8 Working with the electric power tool... 22
9 Service and maintenance..................... 23
10 Accessories .......................................... 23
11 Environment ......................................... 24
12 EU Declaration of Conformity .............. 25
The specified illustrations appear at the beginning
of the Operating Instructions.
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of as domestic waste.
Direction of rotation of saw and the saw
blade
Saw blade dimensions
a
a ... Diameter
b
b ... Locating bore
Tip or advice
Handling instruction
Safety class II
Hazardous area! Keep hands away!
Symbol Significance
Disconnect from the power supply!
Risk of pinching fingers and hands!
Danger of injury by free-moving saw
blade
Circular saw with unprotected saw blade,
do not lay down
pendulum guard closed
Parking position
Lay down circular saw with closed pendu-
lum guard only
2 Safety instructions
2.1 General safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2 Safety instructions for specific circular
saws
Cutting procedures
DANGER!
a.
ting area and the blade. Keep your second hand
on auxiliary handle, or motor housing. If both
hands are holding the saw, they cannot be cut by
the blade.
b. Do not reach underneath the workpiece. The
guard cannot protect you from the blade below
the workpiece.
c. Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth of the blade
teeth should be visible below the workpiece.
d. Never hold the workpiece in your hands or
across your leg while cutting. Secure the work-
piece to a stable platform. It is important to sup-
port the work properly to minimize body
HK 85 EB
Keep hands away from cut-
GB
17