Safety Warnings; General Safety Instructions For Power Tools - Festool TS 75 EBQ Notice D'utilisation D'origine

Contents
1 Symbols..................................................... 15

2 Safety warnings.........................................15

3 Intended use..............................................18
4 Technical data........................................... 18
5 Operation................................................... 18
6 Settings......................................................18
7 Working with the machine........................ 20
8 Accessories............................................... 21
9 Service and maintenance..........................21
10 Environment.............................................. 22
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear a dust mask.
Wear protective gloves.
Wear ear protection.
Wear protective goggles.
Do not dispose of it with domestic
waste.
Disconnecting the mains power cable
Connecting the mains power cable
Saw blade measurement
a = diameter
Electro-dynamic rundown brake
STOP
Electronics with ajustable and constant
speed as well as temperature monitor­
ing
Safety class II
Tip or advice
Handling instruction
The specified illustrations appear at the begin­
ning of the Operating Instructions.
2 Safety warnings
2.1 General safety instructions for power
tools
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" used in the safety in­
structions refers to mains-powered power tools
(with power cable) or battery-powered power
tools (without power cable).
2.2 Machine-related safety instructions
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Autting accessory contact­
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and
may lead to loss of control.
- Wait until the power tool has come to a
complete halt before placing it down. The
insertion tool can get caught and lead to a
loss of control of the power tool.
- Do not use deformed or cracked saw
blades or cutting sets or saw blades with
blunt or broken cutting edges.
- The saw blade on the power tool must al­
ways be running when it makes contact
with the workpiece.
-
Wear suitable personal protective equip­
ment: ear protection, safety goggles, a dust
mask for work which generates dust, and
protective gloves when working with raw
materials and when changing tools.
- Hazardous/toxic dust may be produced
during work (e.g. wood dust or mineral
wool dust). Contact with or inhalation of
this dust may pose a risk for the operating
personnel or persons in the vicinity. Com­
ply with the safety regulations that apply in
your country.
English
15