Royal Catering RCPS-16E Manuel D'utilisation page 6

INTRODUCTION
The popcorn machine by Royal Catering combines all advantages of machines from other manufacturers.
It is made of aluminum casting and equipped with hardened glass, which is protected against sprinkles and
splashes due to an additional internal coating. This machine offers high quality processing and compliance with
all safety standards. Thanks to its energy-saving operation, this device is very suitable for restaurants, snack
bars, cinemas and many other places.
TECHNICAL DETAILS
Product name
Model
Voltage (V)
Power (kW)
Frequency (Hz)
Temperature (°C)
Amount of oil (ml/once)*
Amount of sugar (g/once)*
Amount of corn (g/once)*
* The above-mentioned proportions are approximate and can be adapted according to the customer's choice
and needs.
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, ple-
ase contact your transport company and distributor within 3 days and document the damages in as much
detail as possible. Do not turn the package upside down! When transporting the package, please ensure
that it is kept horizontal and stable. Please keep all packaging materials (cardboard, plastic tapes and Styro-
foam) so that in case of a problem, the device can be sent back to the service centre as well-protected as
possible.
SAFETY INSTRUCTIONS
1. The popcorn machine should be placed where it has a strong and stable position (a 3% slant is an
advantage).
2. The device should only be connected with an appropriate power source.
3. The safety switch / power switch should be located near the machine. The path must be freely
accessible.
4. All electrical connections have to be carried out by authorized personnel only
10
POPCORN MACHINE
RCPS-16E | RCPR-16E | RCPW-16E | RCPC-
16E | RCPW-16.1 | RCPR-16.1 | RCPW-16.2 |
RCPW-16.3 | RCPS-16.2 | RCPR-16.3
230
1.6
1.7 für Modell RCPC 16E
50
220~270
210~250 für Modell RCPC 16E
50
50
150
Rev. 01.08.2017
FRONT PANEL
RCPS-16E | RCPR-16E | RCPW-16E | RCPW-16.2 | RCPW-16.3 | RCPS-16.2 | RCPR-16.3 models:
RCPW-16.1 | RCPR-16.1 models:
1. TURN – turning on the stir function
2. HEAT – turning on the bowl heating
3. POWER & LIGHT – turning on the interior light and heating
RCPC 16E model:
1. TEMPERATURE – temperature regulator and display.
Temperature regulator:
The temperature can be set between 210 °C and 250 °C (the best temperature for making popcorn is from
210 °C to 230 °C).
Temperature display:
Shows the actual bowl temperature.
2. WARMING & LIGHT – turning on the showcase light and heating
3. TURN – turning on the stir function
4. HEAT – turning on the bowl heating
5. POWER & LIGHT – turning on the interior light and heating
OPERATION
1. In order to switch on the heating range and the light turn on the switch (Power & Light).
2. Turn on the switch (HEAT) and pre-heat the bowl for 5-6 minutes (for the model RCPC 16E: set the
desired temperature by using the temperature regulator – recommended temperature for popcorn
preparation is between 210 °C and 230 °C – and turn on the HEAT switch). Put 50 ml oil (coconut oil
would be best), 150 g corn and 50 g sugar into the pan.
3. Please note that during the production of popcorn, the door needs to be closed so that the hot popcorn
cannot escape and cause burns.
4. By turning on the stir function (TURN-switch) you can stir the popcorn until all corn is popped. Now, tip
the popcorn out of the bowl. To do that you have to operate the lever attached to the bowl.
Rev. 01.08.2017 11