Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Topcom Butler 5500
9.8
SMS SERVICE CENTER NUMBERS
To send and receive SMS text messages you need the telephone number of your Network's SMS Centre. These
numbers have been pre-loaded into the Butler 5500. You can also find these numbers on the addendum sheet
mentioned per country and per operator. If you accidentally delete the SEND or RECEIVE SMS Service Centre
numbers you will need to re-enter them in order for your SMS Service to work.
The Butler 5500 can store 2 SEND SMS Service center numbers which are selectable and 5 RECEIVING SMS Service
center numbers.
9.8.1 To set the Receiving SMS Centres numbers
•
From the standby screen, press SMS to open the SMS menu.
•
Scroll to Settings and press OK.
•
Press OK to open Service Centres menu.
•
Scroll to Receiving Centres and select OK.
•
Select one of the 5 centre numbers to be changed and press OK.
•
The current stored number will be shown. Press Clear and enter the new number.
•
Press Save to store the number.
9.8.2 To set and select the sending SMS Centre number
•
From the standby screen, press SMS to open the SMS menu.
•
Scroll to Settings and press OK.
•
Press OK to open Service Centres menu.
•
Scroll to Sending Centres and select OK.
•
Select one of the 2 centre numbers to be changed and press OK.
•
The current stored number will be shown. Press Clear and enter the new number.
•
Press Save to store the number.
•
Press Back to go to the Service Centres menu.
•
Press Set Send Centre to choose the sending centre number 1 or 2 and press OK.
This centre number will be used to send a message!
9.9
CHANGING TEMPLATES
•
From the standby screen, press SMS to open the SMS menu. Scroll down to Templates and press OK.
•
Scroll to the template you want and press OK.
•
Edit Template is highlighted. Press OK. Use CLEAR to delete characters or use the navigator to move the cursor.
Use the keypad to enter the new template then press SAVE. The new template replaces the old one.
9.9.1 Delete template
•
From the standby screen, press SMS to open the SMS menu.
•
Scroll down to Templates and press OK. Scroll to the template you want and press OK.
Scroll to Delete Template. Press OK.
10 ADDITIONAL HANDSETS AND BASES
You can subscribe up to 5 handsets on a Butler 5500 base. Each handset can register to 4 base stations and the user
can select which base he wants to use.
10.1 ADDING A NEW HANDSET
!! Only needed when you have deregistered a handset or when you bought a new one !!
First put the base into registration mode:
•
Press and hold the paging
Topcom Butler 5500
button on the base until you hear two beeps.
21
Publicité
Table des Matières
