Designated Use; Intended Purpose; Technical Data; Equipment - Clipster 181881 Mode D'emploi

2. Designated use

2.1 Intended purpose

The clipper is exclusively intended for clipping cattle, horses or large dogs . Any other use, in particular
on humans, is explicitly prohibited .

2.2 Technical data

Clipper
Model designation
Voltage
Motor power
Speed
Amplitude of swing
Dimensions (W/H/L)
Weight
Battery cartridge
Battery cells
Voltage
Capacity
Overload current
Weight
Charger
AC input
DC output
Operating temperature -40 °C – 40 °C
Weight

2.3 Equipment

1 shearing machine with shearing head, 1 set of shearing blades (mounted), 2 batteries,
1 small bottle of oil, 1 screwdriver, 1 manual and 1 storage case

3. Initial commissioning

3.1 Inspection and operating instructions

The inappropriate use of electrical devices, in particular animal breeding devices, is dangerous!
Therefore, observe the following, accident prevention measures before starting the machine:
• Never switch the machine on without properly mounted cutting tips • The voltage stated on the nameplate
must match the mains voltage • Avoid all contact with the moving shearing blades • Only place the machine
on dry surfaces and store in a dry location • Avoid all contact with a machine that is in contact with liquids .
Never shear wet animals . Liquid ingress into the machine reduces the electrical insulation . Only clean the ma-
chine with a dry cloth and a brush or paintbrush • Switch the machine off before changing the battery pack
• Do not use damaged shear blades with broken off teeth . Only use sharp shear blades . Only use the original
shear blades • Never insert an item into an opening of the machine . The machine noise can disturb animals .
A kick or the weight of the animal can result in substantial injuries . Therefore fixate the animal sufficiently
FarmClipper Akku2
14 .4 V
45 W
2300 rpm
6 .5 mm
Approx . 80 mm x 80 mm x 285 mm (Include Battery cartridge)
1090 g (Include Battery cartridge)
4 x 3 .6 V Li-ion battery cells
14 .4 V
2000 m Ah
10 A
213 g
100 – 240 V, 50 / 60 Hz, 35 W
17 V 1500 mA
398 g
21