Mains Connection; Switching On And Off - KERN and SOHN DAB-BA-def-1813 Mode D'emploi

7.5 Mains connection

Power supply is provided via the supplied mains cable.
Check, whether the voltage acceptance on the device is set correctly.
Do not connect the appliance to the power grid unless the information
on the instrument (sticker) matches the local mains voltage.
Do not eliminate the protective effect by using an extension lead
without earth terminal. For power supplies from power grids without
earth terminals call a specialist to establish equivalent protection
according to the relevant installation regulations.

The mains plug must be accessible at any time.

Prior to commissioning check the mains cable for damage.

Place the cable in a way that it cannot be damaged or handicaps
the measuring process.
Important:
Does the rating match the standard local mains current?

Do not connect if mains voltages are different!
 If matching, connect the moisture analyser.

7.6 Switching on and off

Turn on appliance by pressing the ON/OFF key.
The display lights up and the equipment conducts a self-test. Wait
until basic configuration appears.
To switch off press the ON/OFF button, the display disappears.
DAB-BA-e-1813 19