Set Drying Temperature - KERN and SOHN DAB-BA-def-1813 Mode D'emploi

4. Set drying temperature

 After acknowledgement of the selected switch-off criterion by
currently set drying temperature is flashing.
 Using arrow keys
two digits and confirm by
 Using arrow keys
 Confirm input by
If as switch-off criterion <AUTO> or <MANUAL> is selected, the parameter
setting is finished here. All parameter settings will be applied to a subsequent
drying process and displayed on screen. All settings are stored under the ident
number <1> until a new method is allocated to the ident number.
<AUTO>
When <TIMING> is selected, the display of setting the drying period of time is
flashing, see step „5".
DAB-BA-e-1813
, select the desired value for the first or the first
.
select the desired value for the last digit.
.
, the
<MANUAL>
33