Mount The Retrofit Kit 3 (Two Fans); Final Tasks - Truma S 3004 Instructions De Montage

Cabling
Integrated control panel is fitted on the right
2

Mount the retrofit kit 3 (two fans)

– Connect the cable on the knob socket (4) to the sensor
PCB (2).
– Push the integrated control panel (5) from the operating
side through the cover (11) and click into place.
– Connect every cable (6) on the control panel (5) and the
sensor PCB (2).
– Close all unused openings with a blank cover (12).
– Push the cable into the clamp on the cover.
– Connect the cable (14 – fan).
5 6
5
6
14 14
5
11
4
14 6
11
4
2

Final tasks

– Place the cover (11) on the support (10) and click in. Make
sure that the cables are laid without any bends and are not
jammed.
– Align the control rod (13) toward the middle of the knob
socket (4) during assembly.
– Place the control knob (3 – gas) on the control rod (13) so
that the marking points to the "0" position.
5
12
14
10
3
11
12
4
0
1
5
4
2
3
13
13