Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GTL 3 Professional Notice Originale

14 | English
so could lead to blindless, or could cause accidents or
damage to the eyes.
If laser radiation hits your eye, you must close
u
your eyes and immediately turn your head away
from the beam.
Do not make any modifications to the laser equip-
u
ment.
Do not use the laser goggles as protective goggles.
u
The laser goggles make the laser beam easier to see;
they do not protect you against laser radiation.
Do not use the laser goggles as sunglasses or while
u
driving. The laser goggles do not provide full UV pro-
tection and impair your ability to see colours.
Have the measuring tool serviced only by a quali-
u
fied specialist using only original replacement
parts. This will ensure that the safety of the measur-
ing tool is maintained.
Do not let children use the laser measuring tool un-
u
supervised. They could accidentally dazzle someone.
Do not use the measuring tool in explosive atmo-
u
spheres which contain flammable liquids, gases or
dust. Sparks may be produced inside the measuring
tool, which can ignite dust or fumes.
Keep the measuring tool and the laser tar-
get plate away from cardiac pacemakers.
The magnets (4) on the underside of the
measuring tool and on the laser target
plate (9) generate a field that can impair the
function of cardiac pacemakers.
Keep the measuring tool and the laser target plate
u
away from magnetic data media and magnetically-
sensitive equipment. The effect of the magnets (4)
on the underside of the measuring tool and on the
laser target plate (9) can lead to irreversible data
loss.
Product Description and
Specifications
Please observe the illustrations at the beginning of this
operating manual.
1 609 92A 4HU | (16.01.2019)

Intended Use

The measuring tool is intended for measuring and check-
ing right angles and for aligning tiles at angles of 45°
and 90°.
The measuring tool is suitable for indoor and outdoor
use.

Product Features

The numbering of the product features shown refers to
the illustration of the measuring tool on the graphic
page.
(1) Laser warning label
(2) Laser beam outlet aperture
(3) On/off button
(4) Magnet
(5) Serial number
(6) Battery warning
(7) Battery compartment cover locking mechan-
ism
(8) Battery compartment cover
(9) Laser target plate
(10) Levelling plate
(11) Levelling plate side notch
(12) Protective bag
(13) Laser viewing glasses
A) Accessories shown or described are not included with
the product as standard. You can find the complete se-
lection of accessories in our accessories range.

Technical Data

Tile laser
Article number
Working area
A)
(with laser target plate)
B)
Angle accuracy
Operating temperature
Storage temperature
Max. altitude
Relative air humidity max.
A)
GTL 3
3 601 K15 2..
20 m
±0.2 mm/m
−10 °C to +50 °C
−20 °C to +70 °C
2000 m
90 %
Bosch Power Tools