Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.
Press F knob (9) to
validate.
The parameter of the chosen function blinks on
the display.
3.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
to
modify
the value of the parameter.
4.
New press F knob (9) to
validate
blinking and if the function has more than one parameter, the next param-
eter blinks.
5.
If no key is pressed, the unit exits MENU after 10 seconds.
the display.
Note: UP/DN buttons (14) on the microphone have the same effect as the
rotation of the rotary CH knob (3). PTT switch (13)
and
exists
MENU.
disappears.
1) COLOR
This function allows to
choose
Press F knob (9) to
enter
MENU.
1.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
select
to
the COLOR function.
2.
Press F knob (9) to
validate.
The current COLOR blinks on LCD.
3.
Turn the rotary CH knob (3) or use UP/DN buttons (11) on the microphone
to
select
the color. 7 available colors over and over :
4.
New press F knob (9) to
validate
blinking. a) Go to point 1 to
adjust
(13) to
validate
and
exit
MENU.
5.
exits
If no key is pressed, the unit
the display.
Default COLOR is
(red).
2) DIM
The DIM function (dimmer) allows to
the backlight or OF (no backlight).
Press F knob (9) to
enter
MENU.
1.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
to
select
the DIM function.
2.
Press F knob (9) to
validate.
The current value blinks on LCD.
3.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
to
select
a new value.
4.
New press F knob (9) to validate. The parameter stops blinking. a) Go to
point 1 to
adjust
another function or b) Press the PTT switch (13) to
exit
MENU.
and
disappears.
the chosen value. The parameter stops
disappears from
validates
the last setting
the backlight color of the LCD.
is displayed.
the chosen color. The parameter stops
another function or b) Press the PTT switch
disappears in the display.
MENU after 10 seconds,
disappears in
adjust
the brightness (from1 to 9) of
is displayed.
5.
If no key is pressed, the unit
the display.
Default DIMMER value is 9.
3) KEY BEEP
When the function is activated, a beep
changing the channel etc. "BP" appears on the display when the function
is active.
Press F knob (9) to
1.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
to
select
the KEyBP function.
2.
Press F knob (9) to
3.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
to
activate
On /
deactivate
4.
New press F knob (9) to validate. The parameter stops blinking. a) Go to
point 1 to
adjust
another function or b) Press the PTT switch (13) to
exit
MENU.
and
5.
If no key is pressed, the unit
the display.
Default KEY BEEP is On.
4) ROGER BEEP
When the function is active, the icon
sounds
The Roger Beep
leased in order to let your correspondent speak. Historically as transceiver
is a "simplex" communication mode, it is not possible to speak and to listen
at the same time (as it is the case with a telephone). Once someone had
finished talking, he said "Roger" in order to prevent his correspondent that
it was his turn to talk. The word "Roger" has been replaced by a significant
beep. There comes "Roger beep" from.
Press F knob (9) to
1.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
select
to
the RG BP function.
2.
Press F knob (9) to
3.
Turn the rotary CH knob (3) or use UP/DN buttons (14) on the microphone
to
activate
On /
deactivate
4.
New press F knob (9) to validate. The parameter stops blinking. a) Go to
point 1 to
adjust
another function or b) Press the PTT switch (13) to
and
exit
MENU.
5.
If no key is pressed, the unit
the display.
validate
Default ROGER BEEP is Of.
36
exits
MENU after 10 seconds,
sounds
when a key is pressed, by
enter
MENU.
is displayed.
validate.
The current status blinks on LCD.
Of the function.
disappears.
exits
MENU after 10 seconds,
appears on the display.
when the PTT switch (13) on the microphone is re-
enter
MENU.
is displayed.
validate.
The current status blinks on LCD.
Of the function.
disappears.
exits
MENU after 10 seconds,
disappears in
validate
disappears in
validate
disappears in
Publicité
Table des Matières
