Designated Use; Personal Protective Equipment (Ppe) - Abicor Binzel ABIPLAS WELD CT Mode D'emploi

®
ABIPLAS WELD CT
1 Identification
The ABIPLAS
gas welding using inert gases and gas mixtures containing active gases. This series can be used
for joint welding in all welding positions. The ABIPLAS
available in a liquid-cooled version. Its operation requires a power source with an integrated or
separate coolant recirculator. These operating instructions only describe the
®
ABIPLAS
ABICOR BINZEL spare parts.
1.1 Marking
This product fulfills the requirements that apply to the market to which it has been introduced. A
corresponding marking has been affixed to the product, if required.
2 Safety
The attached safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose and in the
manner described in these instructions. In doing so, observe the operating, maintenance
and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.

2.2 Personal protective equipment (PPE)

To avoid danger to the user, these instructions recommend the use of personal protective
equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective
gloves and safety shoes.
BAL.0128 • 2019-09-04
®
WELD CT welding torch system is used in industry and the trade sector for inert
WELD CT welding torch system, which must only be operated using original
1 Identification
®
WELD CT welding torch system is
EN - 3