Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1
Identification
1.1
Marking
2
Safety
2.1
Designated use
2.2
Personal protective equipment
(PPE)
2.3
Classification of the warnings
2.4
Special warnings for operation
2.5
Emergency information
3
Product description
3.1
Technical data
3.2
Abbreviations
3.3
Signs and symbols used
3.4
Nameplate
4
Scope of delivery
5
Functional description
6
Putting into operation
6.1
Setting up the ABIPLAS® WELD
150 CT20 torch body
6.2
Setting up the ABIPLAS® WELD
250 CT20 torch body
6.3
Mounting the plasma segment
holder
6.4
Attaching the torch body to the
complete bracket
EN - 2
EN-3
6.5
EN-3
6.6
EN-3
6.7
EN-3
6.8
EN-3
6.9
EN-4
EN-4
7
EN-5
7.1
7.2
EN-5
EN-5
8
EN-8
EN-8
9
EN-8
9.1
9.2
EN-9
10
EN-9
11
EN-10
EN-11
EN-12
EN-13
EN-14
ABIPLAS
Connecting the cable assembly EN-15
Attaching the connector to the
device
Mounting the wire conduit and
liner
Connecting the coolant
Setting the gas flow rate
Operation
Before switching on
Welding process
Putting out of operation
Maintenance and cleaning EN-19
Torch body
Cable assembly
Troubleshooting
Disposal
BAL.0128 • 2019-09-04
®
WELD CT
EN-15
EN-15
EN-16
EN-17
EN-17
EN-18
EN-18
EN-19
EN-20
EN-21
EN-21
EN-22
Publicité
Table des Matières
