8.5.6 Cleaning the shower screen and shower screen
containment ring
Clean the shower screen and shower screen contain-
ment ring on a weekly basis, following the steps indicated
below:
• Loosen the screw using a
screwdriver (1);
• Remove the shower screen
(2) and the shower screen
containment ring (3);
• Carefully wash the two com-
ponents with hot water;
• Reposition the shower
screen and shower screen
containment ring in their original position and lock
everything in place with the screw.
8.5.7 Cleaning the shower screen group and filter holder
Clean daily the shower screen group and of the filter
holder with the brush provided.
Thoroughly clean the inside of the coupling ring and
of the filter holder; as well as the edge and the wings
of the filter holder, so as to eliminate any accumulated
coffee residues.
Use the special toothbrush supplied (see spare parts catalo).
USER manual
8.5.8 Cleaning the steam wand and autosteamer
Clean the steam spout once and autosteamer a week
as follows:
• Immerse the spout in a jug with water and a specific
detergent according to manufacturer's instructions;
• heat the solution with the steam of the spout;
3
• let the spout cool off keeping it
immersed in the solution for at
least 5 minutes to allow the de-
tergent to rise inside the spout by
2
cooling effect;
• repeat the operation 2 or 3 times
until milk is delivered.
1
79
288
of