SKF TIH L 77 MB/LV Mode D'emploi page 11

Area between
supports
(width × height)
Coils diameter
Weight with bearing
supports
Workpiece maximum
weight
Maximum heating
temperature
Standard yoke
cross section
SKF TIH L MB
TIH L 33 MB: 330 × 320 mm (13 × 12.6 in.)
TIH L 44 MB: 465 × 492 mm (18.31 × 19.4 in.)
TIH L 77 MB: 765 × 792 mm (30.1 × 31.2 in.)
TIH L 33 MB: 150 mm (5.9 in.)
for minimum workpiece bore diameter of 160 mm (6.3 in.)
TIH L 44 MB & TIH L 77 MB: 175 mm (6.9 in.)
for minimum workpiece bore diameter of 185 mm (7.3 in.)
TIH L 33 MB: 140 kg (309 lb)
TIH L 44 MB: 324 kg (714 lb)
TIH L 77 MB: 415 kg (914 lb)
Bearing TIH L 33 MB: 700 kg (1 543 lb)
Bearing TIH L 44 MB & TIH L 77 MB: 1 200 kg (2 600 lb)
Solid component: consult SKF
approx. 250 °C (482 °F)
Depending on bearing or workpiece weight.
For higher temperatures, please contact SKF.
TIH L 33 MB: 80 × 80 mm (3.15 × 3.15 in.)
for minimum workpiece diameter of 115 mm (4.5 in.)
TIH L 44 MB & TIH L 77 MB: 100 × 100 mm (3.9 × 3.9 in.)
for minimum workpiece diameter of 150 mm (5.9 in.)
9