Yamaha Kodiak YFM450FAV Manuel Du Propriétaire page 318

1. Engine guard
3. Bolt (× 11)
1. Protège-carter
3. Boulon (× 11)
1. Protector del motor
2. Protector de la caja de la transmisión final
3. Perno (× 11)
2. Final gear case guard
2. Plaque de protection du carter
4. Install the oil filler bolt, and then tighten it to
the specified torque.
Tightening torque:
Final gear oil filler bolt:
23 Nm (2.3 m·kgf)
Changing the final gear oil
1. Remove the engine guard and the final gear
case guard by removing the bolts.
2. Place the ATV on a level surface.
3. Place a container under the final gear case to
collect the used oil.
8-45