Cooling System - Yamaha Kodiak YFM450FAV Manuel Du Propriétaire

1. Coolant reservoir cap
2. Maximum level mark
3. Minimum level mark
1. Bouchon du vase d'expansion
2. Repère de niveau maximum
3. Repère de niveau minimum
1. Tapa del depósito de refrigerante
2. Marca de nivel máximo
3. Marca de nivel mínimo

Cooling system

1. Place the ATV on a level surface.
2. Check the coolant level in the coolant reser-
voir when the engine is cold as the coolant
level will vary with engine temperature.
NOTE:
_
The coolant level should be between the minimum
and maximum level marks.
_
3. If the coolant is at or below the minimum level
mark, remove panel D. (See pages 8-19–
8-21 for panel removal and installation proce-
dures.)
4. Remove the reservoir cap, add coolant to the
maximum level mark, install the reservoir
cap, and then install the panel.
8-57
EBU13210