88
Example:
Use of the add-on module for 4 additional analogue/digital input ports
Fig. 28: Add-on module – Position of the jumpers when used for additional analogue/digital input ports
If the additional connection options (connection 1–6) are to be used for door
signalling contacts, for example, the jumpers must be positioned as shown in
Fig. 28/1.
Assignment of connections 1–6 if the jumpers have been positioned as shown in
Fig. 28/1:
Controller screw
terminals
1
2
3
4
5
6
1 input port
GND
IN 1 (INPUT PORT 1)
IN 2 (INPUT PORT 2)
IN 3 (INPUT PORT 3)
IN 4 (INPUT PORT 4)
GND