Häfele WT 200 Instructions De Montage Et De Maintenance page 87

The 6 additional connection options (Fig. 25/2) are now available on the controller
screw terminals.
Fig. 27: Position connection no. 1 (white dot)
The white dot (Fig. 27/1 and 2) marks the respective connection position with the
number 1 in the circuit diagram.
Assignment options for the additional connections at the 6 controller screw
terminals
Controller 3 relay
screw ports (NO
terminals and C)
1 NO 1
2 C 1
3 NO 2
4 C 2
5 NO 3
6 C 3
Pin 1 input port
1
2
3
4
5 IN 4
6 GND
2 relay 1 relay port
ports (NO (NO and C)
and C) 3 input ports
1 input
port
NO 1 NO 1
C 1 C 1
NO 2 IN 2
C 2 IN 3
IN 4 IN 4
GND GND
2 input ports 3 input ports
IN 2
IN 3 IN 3
IN 4 IN 4
GND GND
2 relay 1 relay
ports (NO, ports (NO,
C and NC) C and NC)
2 input
ports
NO 1 NO 1
C 1 C 1
NC 1 NC 1
NO 3 IN 3
C 3 IN 4
NC 3 GND
4 input ports
GND
IN 1
IN 2
IN 3
IN 4
GND
87