Dometic Waeco SinePower MSI912 Instructions De Montage Et De Service page 42

Technical description
I
NOTE
The individual values are found in the chapter "Technical data" on
page 58.
The device can also be configured with a PC via an RS-232 interface and us-
ing the DIP switches on the device.
The inverter can be switched to an energy-saving mode to prevent the con-
nected battery from discharging too quickly.
The inverter can be easily controlled using the remote control (accessory).
The SinePower MSI1812T and SinePower MSI1824T inverters are fitted
with a 230 Vw priority circuit. If an external 230 Vw voltage is available, this
will have priority. If no external 230 Vw voltage is connected, then the con-
nected battery will be used as the power supply.
42
SinePower
EN