Pitch Slider - JB Systems CD 410 Mode D'emploi

1. Open/Close
Press it to open and close the disc holder. The main unit also
includes OPEN/CLOSE buttons. The disc holder cannot be
opened during playback, so stop playback before pressing the
button.
2. Time Button
Press this button to switch the time display between the elap-
sed time and remaining time and total remaining time. The
selected mode is indicated by the indicators 'Elapsed', 'Remain'
and 'Total Remain' on the LCD.
3. LCD
4. LOOP (Loop Button)
Press the LOOP button to set the loop start point, press the
LOOP button again to set the loop end point.
5. PITCH - Button
The CD slows down while this button is pressed. Release the
button to return to the original BPM.
6. PITCH + Button
The CD speeds up while this button is pressed. Release the
button to return to the original BPM.
7. PITCH (Pitch Button)
Use this button to enable or disable BPM adjustment with the
pitch sliders. BPM adjustment with the pitch sliders is enabled
when the pitch LED lights.

8. Pitch Slider

Use the slider to adjust the CD pitch. Slide up to decrease the
pitch, down to increase the pitch.
9. Play/Pause Button
Use the button to start playback. Press once to start playback,
once again to set the pause mode, and once more to resume
playback.
5 CD 410