JB Systems CD 410 Mode D'emploi page 8

21. PLAY Indicator
The play indicator lights during play mode.
22. PAUSE Indicator
The pause indicator lights during pause mode.
23. CUE Indicator
The cue indicator lights during cue mode or pause mode,
flashes when cue point is changed.
24. Elapsed Indicator
It indicates that the time shown on the display is the elapsed
time.
25. Total Indicator
It indicates that the time shown on the display is the Total
Remaining time of playback.
26. BAR Indicator
These ten indicators provide a visual display of the approxi-
mate position of the pickup within the current track.
27. Remain Indicator
Indicates that the time shown on the display is the remaining
time of the playing track.
28. Single Indicator
When the indicator lights, playback will stop at the beginning
of the next track.
29. Program Indicator
The program indicator lights when the program mode is set.
30. Pitch Indicator
When the indicator lights, the pitch mode is enabled.
31. Loop Indicator
When the indicator lights, the loop mode is enabled.
32. - 35. Track, Minute, Second & Frame Displays
These displays indicate information on the CD's current
position and time.
CD 410 8