JB Systems CD 410 Mode D'emploi page 6

10. SGL/CTN (Single/Continuous Button)
Press it to switch between the single and continuous play
modes. The SINGLE mode is indicated by the Single indicator
on the LCD.
11. CUE (Cue Button)
Press the Cue button during playback to return to the position
at which playback started.
12. Program (Program Button)
Press the Program button, the player will enter the program
mode and stop the CD playback.
13. SKIP
Use this button to go back to the beginning of the current
track or to select a previous track for playing.
14 & 15. Search/Scan
Press these buttons to perform frame search function during
pause mode or to perform scan function during play mode.
16. SKIP
Use this button to skip to the next CD track.
17. PITCH (Pitch Indicator)
Moving the pitch slider will change the pitch but only when
the pitch LED is illuminated.
18. Relay
Press the Relay button to enable or disable the Relay
function. While the Relay is enabled, the LED will light. In the
single mode, the CD player will be paused at the next track
when finished playing the current track. Only the other side
of the CD player that is standby in pause mode will start
playing automatically. There is no Fader start function when
in the Relay mode. Press the Relay button do disable relay
function. The LED will go out when Relay is disabled.
CD 410
&
6