TFA KlimaLogg Pro Mode D'emploi page 37

- Radio-controlled time reception ON/ OFF
- 12/ 24 hour format
- Temperature unit (°C/ °F)
- Manual time setting
- Manual date setting
- Main reset
After you press and hold the SET button for three seconds, you are
automatically taken to the first setting option for basic settings, the
contrast setting. Pressing the SET button once again takes you to the
next setting option.
If no button is pressed for 20 seconds, the KlimaLogg Pro automatically
switches back to the normal view. You can return to the normal view at
any time by pressing the "HIST/DEL", the "USB" or the "ALM" button.
Changes at the setting-mode require no additional confirmation and are
automatically saved when you leave or go further to the next setting.
If you press and hold the "+" or "-" button, you are quickly taken through
the possible settings (time, date and time zone settings).
LCD-contrast:
„CONTRAST" appears on the text display and the default „5" starts
flashing. With the + or - button you can select between 0 until 7 as
the LCD contrast.
Time zone:
„TIMEZONE" appears on the text display and the default „0" starts
flashing.
With the + or - button you can set the time zone (-12 until +12
hours).
Alarm sound ON/OFF:
„ALERTSOUND" appears on the text display and the default "ON"
starts flashing. With the + or - button you can deactivate (OFF) or
activate (ON) the alarm sound. If the alarm sound is activated, the
alarm symbol will appear (bell) in the toolbar. If the alarm sound is
deactivated, the alarm symbol does not appear.
Note:
36