WARNING LASER RADIATION
Max. Output: <1mW Wavelenght: 635-660nm
Complies with 21 CFR Chapter 1, subchapter J
Safety recommendations
•
Always read and follow the operating instructions for use.
•
Never stare directly into the laser source. Class II laser product.
•
Never aim the laser beams into anyone's eyes.
•
Never open the instrument.
•
Never use the instrument under rain or very wet conditions
•
Not for intrinsically safe area
•
All repair work should be taken care of by an SKF repair shop.
•
Here is a table of hazardous substance name and concentration
for TKTL 31:
Lead
Part
name
(Pb)
Laser
×
module
The table is prepared in accordance with the provisions of SJ/T11364.
•:
Indicates that said hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement
of GB/T 26572.
× : Indicates that said hazardous substance contained in at least one of
the homogeneous materials used for this part is above the limit
requirement of GB/T 26572.
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
CAUTION
AVOID EXPOSURE LASER RADIATION
IS EMITTED FROM THIS APERTURE
Hazardous Substances
Mercury
Cadmium
(Hg)
(Cd)
•
•
Hexavalent
Polybrominated
Chromium
biphenyls
(Cr(VI))
(PBB)
•
•
Polybrominated
diphenyl
ethers
(PBDE)
•
EN
EN
3