DESCRIPTION
1.
Iron handle
2.
Steam trigger
3.
Iron temperature control dial
4.
Base unit
5.
Precision tip
6.
Safety lock (to hold the iron onto the
base unit)*
7.
Removable 1.4L / 47 fl oz water tank
8.
Tank filling shutter
9.
"Calc away system" scale collector
or "boiler rinse" cap cover *
10.
Electric cord storage (Velcro)
11.
Iron rest
12.
Iron temperature control light
PREP R TION
1 • Safety lock
• Your steam station is equipped with a
safety lock that holds the iron on to the
base unit in order to facilitate transport
and storage:
• Pull up –
fig.
1.
• Push down –
fig.
The safety lock allows you to carry your
steam station by the iron handle:
- place the iron on the iron rest of the steam
station and lock it into place (you will hear
an audible "click" sound) –
- Hold the iron by its handle in order to
transport your steam station
2 • Water recommendations
Tap water
• Rowenta steam stations are designed to
be used with UNTRE TED T P W TER. If
your water is very hard, Rowenta
recommends mixing half untreated tap
water with half distilled water which
reduces the hardness.
Softened water :
• There are many types of household water
softeners and the water from many of
them is perfectly acceptable for use in the
steam station. However, some types of
softeners, particularly those that use
chemicals such as salt, can cause the
appliance to leak or spit during use, this is
(according to model)
2.
fig.
1.
- fig. 3.
13.
Steam cord
14.
Steam cord storage clip
15
"Calc way System" scale collector*
16
Control panel
a. Steam ready light
b. ECO button
c. Restart button
d. "Calc way System" indicator or
"boiler rinse" indicator *
e. "Water tank empty" light
17.
On/Off switch
notably the case with filtering jugs.
Therefore we would not recommend
using this type of water.
• If you experience this type of problem, we
recommend that you try using untreated
tap water or store-bought distilled water
which can be mixed 50% distilled with
50% untreated tap water. Once you have
changed water it will take several uses to
correct
the
recommends trying the steam function
for the first time on an old towel or cloth
that can be discarded to avoid potentially
damaging your clothes.
lways remember :
• Heat concentrates the elements in water
during evaporation. The types of water
listed below may contain organic waste,
mineral or chemical elements that can
cause
spitting,
premature wear of the appliance: water
from clothes dryers, scented or softened
water, water from refrigerators, batteries,
air conditioners, rain water, boiled, filtered
or bottled water. These types of water
should not be used in your ROWENT
steam station.
3 • Preparing your steam
station
• Place the steam station on a flat, stable,
horizontal and heat-resistant surface.
9
* according to model
problem.
Rowenta
brown
staining
or