Specifications - Martin Logan Motion 15 Mode D'emploi

s
peCiFiCations
Frequency.Response . . . . . . . . . . . . . . . . . . . . .
Dispersion. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Crossover.Frequency . . . . . . . . . . . . . . . . . . . . .
High.Frequency.Driver. . . . . . . . . . . . . . . . . . . .
Low.Frequency.Driver . . . . . . . . . . . . . . . . . . . .
Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended.Amp.Power . . . . . . . . . . . . . . . .
Binding.Post.Inputs . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions.(HxWxD). . . . . . . . . . . . . . . . . . . . .
*Specifications are subject to change without notice.
*
60–25,000 Hz ± 3 dB
80° x 80°
92 dB @ 2.83 volts/ meter
5 Ohms. Compatible with 4, 6, or 8 Ohm rated
amplifiers.
2,700 Hz
1" x 1.4" (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25" x 1.75" (13.3cm x 4.4cm)
diaphragm.
5.25" (13.3cm) aluminum cone with cast basket.
Non-resonant asymmetrical chamber format. Rigid
structured dust cap to reduce cone break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Overall system thermal/current protection.
20–200 watts
Custom 5-way binding posts
12 lbs. (5.4 kg)
11.4" x 6.8" x 9.5"
(29cm x 17.3cm x 24cm)
7