Introduction; Intended Use - Parkside PPSK 40 A1 Consignes D'utilisation Et De Sécurité

Greatest rated value of the
I
mains current.
1 max
Mains input; number of
phases and alternating
current symbol and rated
1 ~ 50 Hz
value of the frequency.
Open circuit voltage
U
rated value
0
Plasma cutter with integrated
compressor PPSK 40 A1

• Introduction

Congratulations! You have
purchased one of our high-quality products.
Please familiarise yourself with the product
before using it for the fi rst time. Please also
read the safety instructions carefully.
This product must be set up or used only by
people who have been trained to do so.
Keep out of the reach of children!
PLEASE NOTE!
The use of the term 'product' or 'device'
in the following text refers to the plasma
cutter with integrated compressor named
in these operating instructions.

• Intended use

The device is intended for compressed-air
plasma cutting of all electrically conductive
metals. Observing the safety instructions
and assembly instructions and operating
information in the instructions for use is also
a component of the intended use.
Table of pictograms used / Introduction
Rated value of the cutting
I
current
2
Static frequency
converter-transformer-
commutator
Rated value of the
U
mains voltage
1
It is imperative to adhere to the applicable
accident prevention regulations. The device
must not be used:
in insuffi ciently ventilated rooms,

in moist or wet environments,

in explosive environments,

to defrost pipes,

in close proximity to people with cardiac

pacemakers and
in close proximity to easily fl ammable

materials.
Use the product only as described and only
for the specifi c applications as stated. Keep
these instructions in a safe place. Ensure you
hand over all documentation when passing
the product on to anyone else. Any use that
differs to the intended use as stated above
is prohibited and potentially dangerous.
Damage or injury caused by misuse or dis-
regarding the above warning is not covered
by the warranty or any liability on the part
of the manufacturer. The device is intended
for professional use. Commercial use will
void the guarantee.
RESIDUAL RISK
Even if you operate the device as intended,
there will be residual risks.
GB/IE/NI/CY/MT 7