Welding Mask-Specifi C Safety Instructions; Environment With Increased Electrical Hazard - Parkside PPSK 40 A1 Consignes D'utilisation Et De Sécurité

Safety instructions
Use a welding safety helmet

and make sure that the fi lter
setting is correct.
Wear complete body

protection.
Danger from electro-
magnetic fi elds:
Cutting current generates

electromagnetic fi elds.
Do not use if you have a

medical implant.
Never wrap the cutting

cable around your body.
Guide cutting cables

together.
 Welding mask-specifi c
safety instructions
With the help of a bright light

source (e.g. lighter) examine
the proper functioning of the
welding shield prior to starting
with any cutting work.
Cut spatters can damage the

protective screen. Immediately
replace damaged or scratched
protective screens.
Immediately replace damaged

or highly contaminated or
splattered components.
The device must only be

operated by people over the
age of 16.
12 GB/IE/NI/CY/MT
Please familiarise yourself with

the cutting safety instructions.
To that end, you must also
observe the safety instructions
of your plasma cutter.
Always wear a welding helmet

while welding and plasma
cutting. If it is not used, you
could sustain severe lesions
to the retina.
Always wear protective

clothing during welding and
plasma cutting operations.
Never use the welding shield

without the protective screen
because this could damage the
optical unit. There is a risk of
damage to the eyes!
Regularly replace the protective

screen to ensure good visibility
and fatigue-proof work.
 Environment with
increased electrical
hazard
Environments with increased
electrical hazard may be encoun-
tered, for example:
In workplaces where the space

for movement is restricted,
such that the operator is
working in a forced posture
(e.g.: kneeling, sitting, lying)
and is touching electrically
conductive parts;