Oven Modes - Fulgor Milano ACCENTO 30 Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9 - Oven Modes

EN
The following illustrations give an overview of what happens in the oven with each mode setting. The arrows represent the location
of the heat sources during specific modes. The lower element is concealed under the oven floor.
In maximum setting time for heating, it is until 11 hours 59 minutes.
After the heating end, "End" is displaying it to a display:
• Time is united by + [INC] or - [DEC], and additional heating can be performed.
• Change of a function can be performed by Cooking Mode Dial.
Convection Bake
(MULTI CONV BAKE)
Set temperature:
from 120 °F (50 °C) to 480 °F (250 °C)
(preset position 375 °F (190 °C)
Convection Bake cooks with heat from
ring elements behind the back wall of the
oven. The heat is circulated throughout
the oven by the Convection Fan.
Bake (BAKE)
Set temperature:
from 120 °F (50 °C) to 485 °F (250 °C)
(preset position 410 °F (210 °C)
Bake cooks with heated air. Both the
upper and lower elements cycle to
maintain the oven temperature.
16
CAVITY STYLES
Convection Broil
(CONV BROIL)
Set temperature:
from 120 °F (50 °C) to 485 °F (250 °C)
(preset position 445 °F (230 °C)
Convection Broil combines the intense
heat from the upper element with the
heat circulated by the Convection Fan.
Broil (BROIL)
Set temperature:
from 120°F (50°C) to 485°F (250°C)
(preset position 445°F (230°C)
Broiling uses intense heat radiated from
the upper element.
Convection Roast
(CONV ROAST)
Set temperature:
from 120 °F (50 °C) to 480 °F (250 °C)
(preset position 375 °F (190 °C)
Convection Roast uses the upper and
lower elements and Convection Fan.
Defrost (CONV)
Defrost does not use any heating
element, but only the Convection Fan is
used to defrost foods.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Accento 36

Table des Matières