Oven Extendable Rack - Fulgor Milano ACCENTO 30 Guide D'utilisation

To replace an Oven Rack:
1. Place rear of rack between rack level guides
2. While lifting front of rack, slide rack in all the way while
lowering the front

Oven Extendable Rack

The Extendable Rack allows for easier access to cooking
foods. It extends beyond the standard flat rack bringing the
food closer to the user.
CAUTION
When the rack is outside of the oven, slide arms do not
lock. They could unexpectedly extend if the rack is carried
incorrectly. Extending slide arms could cause injury. Rack
should only be held or carried by grasping the sides.
NOTE: Always remove the Extendable Rack before Self-
Cleaning the oven.
CAUTION
To avoid burns, pull rack all the way out and lift pan above
handle when transferring food to and from oven.
Please refer to illustration on Page 6 if there is any question
as to which side is the front of the rack.
6 - General Oven Tips
To remove Extendable Rack from the oven:
Lift of rack slightly and push it until the stop release
Raise back of rack until frame and stop clear rack guide
Pull rack down and out
To replace an Extendable Rack:
Grasp rack firmly on both sides. Place rack (including frame)
above desired rack guide
Push all the way in until the back of the rack drops into place
Pull both sections forward until stops activate. Rack should be
straight and flat, not crooked
EN
11