Special Conditions For Safe Use - MEDC BG3 Manuel Technique

5.0 CERTIFICATION/APPROVALS (EEx ia units only)
Certified to: EN50014, EN50020 & EN50284
EEx ia unit ATEX certification No. BAS000ATEX1067X
EEx ia IIC T4 (Tamb. -55°C to +55°C)
Unit parameters are as follows:
Ui = 29V
Ii = 147mA
Pi = 800mW
The certificate and product label carry the ATEX group and category marking:
II 1 G
Where:
Signifies compliance with ATEX
II Signifies suitability for use in surface industries
1 Signifies suitability for use in zone 0
G
Signifies suitability for use in the presence of gases
These units also have the following approvals:
Ingress protection (IP66 & 67) to BS EN 60529:92

6.0 SPECIAL CONDITIONS FOR SAFE USE

When the unit is constructed or coated in a non-conductive material, precautions should be taken to
prevent the build up of electrostatic charges
Clean only with a damp cloth.
Apparatus constructed in such a manner can be identified by a warning label.
© MEDC 2016 07/16