Technical Data; Vibration Level; Disposal; Ec-Declaration Of Conformity - Batavia Maxx Série Mode D'emploi

English
• If increased brush fire occurs this indi-
cates that the carbon brushes are worn
and should be replaced. Have the
brushes replaced by a professional.

21. Technical data

Voltage Supply: . . . . . . . . 230 V~ 50 Hz
Power Consumption: . . . . . . . . . . 800 W
Stroke Rate:. . . . . . . . . . . 0 - 3000 min
Stroke Length: . . . . . . . . . . . . . 20 mm
Saw positions: . . . . . . . . . . . . . . . . . 4
Bevel Base: . . . . . . . . . . . . . 45° 0° 45°
Cutting Capacity Wood: . . . . . . .100 mm
Cutting Capacity Steel: . . . . . . . . 10 mm
Weight: . . . . . . . . . . . . . . . . . . 2.5 kg
Cable length: . . . . . . . . . . . . . . . . 3 m
A-weighted noise levels:
Sound pressure level (L
Uncertainty: . . . . . . . . . . . . K = 3 dB(A)
Sound power level (L
Uncertainty: . . . . . . . . . . . . K = 3 dB(A)
Hand Arm Vibration:
Wood:. . . . . . . . . . . . . . 18.914 m/s
Metal sheet: . . . . . . . . . . . 5,208 m/s
Uncertainty: . . . . . . . . . . . K = 1.5 m/s
Protection Class:. . . . . . . . . . . . . . . . II

Vibration level

21.1
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
• using the tool for different applications,
or with different or poorly maintained
accessories, may significantly increase
the exposure level
• the times when the tool is switched off
or when it is running but not actually
doing the job, may significantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
10
7062849-Jig_Saw_800W-Ma-1803-09.indb 10
-1
): . . . . . 90 dB(A)
pA
): . . . . . .101 dB(A)
WA
2
2
2

22. Disposal

Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council.

23. EC-Declaration of conformity

We, the Batavia GmbH, Weth. Buitenhuis-
str. 2a, NL-7951 SM Staphorst, declare by
our own responsibility that the product Jig
Saw, Item-No 7062849, Model Nr. BT–
JS002 is according to the basic require-
ments, which are defined in the European
Directives Electromagnetic Compatibility
2014/30/EU (EMC), 2006/42/EC (Machin-
ery) and their amendments. For the evalua-
tion of conformity, the following harmonized
standards were consulted:
EN 60745-1: 2009+A11;
EN 60745-2-11: 2010;
EN 55014-1: 2006+A1+A2;
EN 55014-2: 2015;
EN 61000-3-2: 2014;
EN 61000-3-3: 2013
Staphorst, 18 March 2018
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
22-03-18 11:07