close to hand for prompt consultation when required.
The manual provides important safety warnings for the operator and other people nearby, as well as
instructions for environmental protection.
In the event of damage or loss, ask for a new copy from the Manufacturer or a Specialist Technician.
If the machine incorporating the motor pump is passed on to another user, also include this manual.
The Manufacturer reserves the right to make any modifications required to update or correct this publication
without notice.
SYMBOLS
The symbol:
marking certain parts of the text indicates a strong risk of personal damage if the relative instructions and
indications are not complied with.
The symbol:
marking certain parts of the text indicates a risk of damaging the motor pump if the relative instructions
are not complied with.
CHARACTERISTICS AND TECHNICAL DATA
The motor pump comprises a membrane or gear pump, integrated with a permanent magnet electric motor
running at 12 V or 24 V direct current.
The pumps are selfpriming and do not require the use of lubricants (dry operation).
POWER
HYDRAULIC CONNECTION
Maximum temperature of supply fluid
Minimum temperature of supply fluid
Maximum pressure of supply fluid
Maximum priming depth
Gear Geopump
Mini Diaphragm Geopump
Other motor pumps
Minimum supply water flow rate
PERFORMANCE
Period of operation/rest
MAXIMUM MASS
Gear Geopump
Mini Diaphragm Geopump
Other motor pumps
The characteristics and data are indicative. The Manufacturer reserves the right to make any
Membrane motor pumps
Voltage and absorption are indicated on the identification plate (7).
Pressure and maximum flow rate are indicated on the
modifications he deems appropriate to the motor pump.
U s e
a n d
WARNING
CAUTION
35 °C 95 °F
5 °C 41 °F
0.05 MPa 0.5 bar 7.3 psi
1.25 m 4.1 ft
1.85 m 6.1 ft
1.3 x maximum motor pump flow rate
identification plate (7).
30 min /30 min
0.8 kg 1.8 lb
2.9 kg 6.4 lb
M a i n t e n a n c e
6
EN
Gear motor pumps
60 °C 140 °F
18 °C 0 °F
1.30 m 4.3 ft
2.7 kg 6.0 lb
19