Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User manual
4. - DESCRIPTION OF ELEMENTS
4.1.- Single-channels
1
2
1.- RF input loop (+ 24Vdc)
2.- RF output loop
3.- Preamplifier power
switch (On/Off)
4.- ON LED
5.- Attenuator
6.- Mains connector
BIII
Operating band
10
Amplified channel
Ch
5083
Product reference
For installer use
Ch
32
VHF Single Channel Amplifier
Single-channel
chassis and "F" connectors that can be rack
or wall mounted.
The loop-through technique is used to mix
the output signal from the units.
The connection between the supply and the
modules,
and
themselves, is carried out via interconnec-
ting links.
3
They also dispose of a bypass current via
4
the
input
connectors
5
6
preamplifiers. This means that they can be
disabled using the switch located on the
front of the equipment.
When various modules are used in an ins-
tallation, the channels with higher
quencies must be located near to the
output that is to be used.
amplifiers
with
diecast
between
the
modules
to
power
the
fre-
Publicité
Table des Matières
