Receive Mode; Using Optional Equipment; Cd/Md Changer - Sony CDX-GT805DX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Auto Scroll
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "off" (
): to not scroll.
z
– "on": to scroll.

RECEIVE MODE

Local (Local seek mode)
– "off" (
): to tune normal reception.
z
– "on": to only tune into stations with stronger
signals.
Mono (Monaural mode)*
To improve poor FM reception, select monaural
reception mode.
– "off" (
): to hear stereo broadcast in stereo.
z
– "on": to hear stereo broadcasts in monaural.
IF
– "Auto" (
): to narrow automatically the
z
reception frequency to eliminate noise.
– "Wide"*
3
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
BTM (page 8)
SOUND
HDEQ (page 11)
DSO 3D (page 12)
I-TA (page 12)
Front HPF (High Pass Filter)
To select the front speaker cut-off frequency:
"off" (
), "63Hz," "78Hz," "100Hz," "125Hz"
z
or "160Hz."
Rear HPF (High Pass Filter)
To select the rear speaker cut-off frequency:
"off" (
), "63Hz," "78Hz," "100Hz," "125Hz"
z
or "160Hz."
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off"
(
), "63Hz," "78Hz," "100Hz," "125Hz" or
z
"160Hz."
BBE MP (page 2)
Loudness
To allow you to listen clearly at low volume
levels.
– "on": to reinforce bass and treble.
– "off" (
): to not reinforce bass and treble.
z
AUX Level
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 16).
2
LIST
When the radio or CD/MD changer is used, the
station frequency, or CD/MD number/track
name is displayed.
*1 When the unit is turned off.
*2 When FM is received.
*3 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.

Using optional equipment

CD/MD changer

Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number, MP3 indication*
LP2/LP4 indication*
Disc/Album number
Playback starts.
*1 When MP3 is played.
*2 When MDLP disc is played.
Skipping discs
1 During playback, press (ENTER) until
"DISC" appears.
2 Rotate the SEEK control dial until the desired
disc appears.
Skipping album and discs with the
card remote commander
1 During playback, press M or m.
To skip
Press M or m.
album
and release (hold for a
moment).
album
within 2 seconds of first
continuously
releasing.
discs
repeatedly.
discs
then, press again within 2
continuously
seconds and hold.
continue to next page t
1
2
15

Publicité

Table des Matières
loading

Table des Matières