Changing The Sign; Save The Preset Value; Recommended Use; Minmax Mode - Bowers Metrology UniCal 300 Notice D'utilisation

Keep [set] button pressed to increment automatically the digit on the cursor.
V.3.3 Changing the sign
Place the cursor under the sign (before the first digit), then press quickly [set] button.
V.3.4 Save the Preset value
Keep [mode] button pressed until 'PRESET' indicator is cancelled.
V.3.5 Recommended use
Set value of preset at 0.000 mm for ref. I and use the ref. II for different preset values.
V.4 Minmax mode
For automatic storage of minimum (or maximum) value in dynamic measurement.
V.4.1 Selection of minmax mode
Keep [mode] button pressed until 'MIN' is displayed.
The instrument selects the function used before leaving this mode (MIN, MAX or |MIN-MAX|). All previous storages of that mode are deleted and the display
shows the current value.
58 58 58 58