Deactivate The Message "Error; Use With Half Duplex Adapter; Modes Of Use; How To Connect The Opto-Rs Cable64 - Bowers Metrology UniCal 300 Notice D'utilisation

VII.1 Deactivate the message "Error"
Press [set] to restart the measurement.
Don't forget to check the instrument's origin.
VIII Use with half duplex adapter
VIII.1 Modes of use
Simplex mode: enables the instrument to be polled from the computer (i.e. footswitch or request by periphery).
Duplex mode: enables the instrument to be polled by the computer and provides for 2 way communication to allow use of the instrument transmit button. The
instrument and other half duplex devices cannot receive and transmit data simultaneously.
VIII.2 How to connect the OPTO-RS cable
Check the way you plug the connector in.
If you plug it wrong, no damage will result but it simply won't work.
VIII.3 Transmission parameters
VIII.4 Use of the simplex mode, without half duplex adapter
The data output can be initiated by quick press on the [set] button in the following modes:
4800 Bauds, even parity, 7 ASCII bits, 2 stop bits
- references
- minmax
- tolerances
64 64
64 64